Assembly Instructions for an Exel Bird Cage

Exelpet Pet Supplies make a double wrought iron bird cage to comfortably house your feathered friends. Although they do come with directions, the single sheet of basic instructions may be a little too basic for the novice bird cage engineer. The cages can be constructed in just a few minutes with the correct directions. Lay out the pieces before you expedite the process.

Things You'll Need

  • Exelpet bird cage
  • Screwdriver
Show More

Instructions

    • 1

      Lay out the components of the bird cage on an open, flat working space. Take one side piece of the stand and attach a side brace to the top. The brace connects with two screws on the top outside of the side piece. Connect the other side piece to the brace in the same way.

    • 2

      Attach the grill to the bottom of the stand using the screws included with the kit. Do not screw in any of the screws all the way. This gives the frame some flexibility until the assembly is complete.

    • 3

      Attach the other brace to the front of the stand with two screws. Turn the stand over and press the wheels into each hollow leg. Tighten all screws and set the stand aside.

    • 4

      Lay out the parts for the two cages. Construct the bottom cage first. Screw the back and the two sides together using the screwdriver and included screws. Do not to tighten the screws.

    • 5

      Place the top grill on and screw in place. If you are not sure which grill to use, stand the two grills up together. The grill for the bottom cage is slightly bigger. Tighten all screws.

    • 6

      Place the bottom cage on the stand. The stand has small tabs to hold the bottom in place. These tabs must be inside the bottom cage frame.

    • 7

      Repeat the assembly steps of the bottom cage to assemble the top cage. Tighten the screws on the top cage and set it on top of the bottom cage.

    • 8

      Bolt the top cage to the bottom cage by screwing the bottom rail of the top cage to the top rail on the bottom cage.

    • 9

      Slide the grill and tray into the the bottom of the bottom cage. Your cage is ready for its new residents.