How to Build a Finch Sock Feeder

Finches are a favorite for birdwatchers everywhere. Their blue, red, purple or yellow body color makes them easy to spot, and if you look closely, you may even see some that have splashes of green or orange. If you want to attract these bright little buddies to your garden or yard, lure them in with thistle or sunflower seeds in this hanging sock feeder.

Things You'll Need

  • One 12 by 12-inch piece of fine plastic mesh
  • Heavy-duty thread
  • Sewing machine
  • Leather cord or shoelace at least 24 inches long
  • Single-hole punch
Show More

Instructions

    • 1

      Punch about 10 small holes in various places on the mesh. The birds will eat the seed from these holes so space them approximately 2 inches apart.

    • 2

      Lay the mesh flat and place the leather cord about 3/4 inch below the top of the mesh, leaving an equal length of the cord extending from both sides of the mesh.

    • 3

      Fold the mesh over the top of the cord and double-stitch the mesh just below the bottom of the cord. The cord is the drawstring on the top of the feeder.

    • 4

      Fold the mesh in half lengthwise so that the ends of the cord are on the same side.

    • 5

      Double-stitch the open side starting from below the drawstring cord to the bottom of the mesh and across the bottom.

    • 6

      Fill the sock with thistle or sunflower seed.

    • 7

      Pull the drawstring cord to close the top and tie a single knot near the closure.

    • 8

      Tie the ends of the drawstring cord together.

    • 9

      Hang the feeder outside where finches will find it.