Things You'll Need
- Teacup and saucer
- Length of copper pipe
- Copper pipe end cap
- Hot glue and hot glue gun
- Mallet
Instructions
Select a teacup and saucer with a pattern you find appealing and that complements your garden's design. Antique and second hand stores are a good source of inexpensive cups and saucers. They often have unique dishes with older or discontinued patterns.
Warm up your hot glue gun and make sure there is enough glue in the gun. When the glue begins to seep out the tip of the glue gun, use it to attach a copper pipe end cap to one end of a copper pipe. The pipe should be between two and four feet long. Both the pipe and end cap and can be found in home improvement stores.
Use the hot glue to attach the bottom of the saucer to the top of the end cap. Only use as much glue as is needed to cover the end cap. Too much glue makes for a messy clean up later on.
Attach the bottom of the teacup to the saucer with the hot glue. Try not to get glue on the sides of the teacup.
Select a location in your garden to place the feeder and stake the copper pipe into the ground by driving the pipe down with a mallet or brute strength. If the ground is hard, it may be helpful to dampen the soil before seating the pipe.
Fill the cup with bird seed. Any type of bird seed will do, but there are varieties that some birds enjoy more than others. If you want to attract a certain type of bird, ask your local pet store what type of bird seed they recommend.
Sit back and enjoy watching the birds flock to your new feeder!