Things You'll Need
- 4 x 4 post
- Plant hangers
- Wood screws
- Cement
- Bird houses
- Bird feeders
Instructions
Mount plant hangers onto the sides of the 4 x 4 post near the top using wood screws. Place the screws through the holes in the plant hangers and screw them directly into the wooden post.
Dig a hole at least 18 inches deep. Fill it with wet concrete. Mix the concrete according to the directions on the sack.
Place the post in the wet concrete. Prop it upright, if necessary, so it'll set in the concrete standing straight. Once the concrete has set, your wooden bird house pole system is ready for use.
Hang bird houses and feeders from the hooked end of the plant hangers.