Things You'll Need
- 10-gallon hanging aquarium filter
- Filtration cartridge
- 6-qt. stainless steel flat-side animal feeding pail
- Rubber bands
- Ribbon
- Small rectangular piece of plastic or wood (optional)
- Glass beads (optional)
Instructions
Assemble the hanging aquarium filter according to the manufacturer's directions. Place a filter cartridge into it.
Hang the filter on the outside of the flat edge of the stainless steel pail, with the water flow facing inward. If the pail you have does not have a flat edge, place a small, rectangular piece of wood or plastic, an inch thick or so, between it and the filter to keep it flush and vertical. You can wrap the filter and the small wooden or plastic piece with a rubber band to keep the piece in place. Alternately, you can prop up the filter on glass beads outside the container. Position the intake tube inside the pail.
Secure the filter to the pail with a rubber band or tie a ribbon around the filter and pail.
Fill the bucket with water about 2 inches from the top. Add water to the top of the filter and plug it in an outlet. Your filter will now clean the water in the pail and let it freely flow like a waterfall.
Allow your cat to investigate the fountain itself, so you do not startle it. Place it where you would normally keep your cat's water bowl so it can get used to it. The stainless steel will not harbor bacteria like most plastic ready-made fountains, preventing cat acne infections.