Things You'll Need
- Plywood
- Saw
- Cat bed pillow
- Staple gun
Instructions
Cut two pieces of plywood with a saw to the size of the pillow you have for your cat to sleep on. These will be the top and bottom of the cube.
Create the back of the cube by making a piece of wood the same width of the cube bottom and as high as you want the cube tall.
Cut two pieces of plywood to create the sides of the cube. The sides should be the same height as the back and the same width as the depth of the bottom piece.
Lay the bottom piece of plywood on the ground and stand the back piece up right behind it. The pieces should form a shape like the letter 'L'.
Attach the back and bottom pieces together along the edge where they meet using a staple gun. Hold the sides pieces standing up against the side of the 'L' and attach all four pieces together.
Lay the top piece so it is resting on the sides and back pieces with all of the edges lined up and attach the pieces together. Set the pillow inside the cube so it is resting on the bottom piece.