How to Make a Box for a Pregnant Dog

It's almost time for your dog to give birth and she needs a secure and safe place to do it. A simple whelping box is the way to go. The size of this project all depends on the size of your dog. Creating her own special place will give her an alternative to your bed.

Things You'll Need

  • Vinyl, painted or plastic-coated plywood
  • 1-inch wood dowels or pvc piping
  • Screws
  • Newspaper, old sheets and towels
Show More

Instructions

  1. Puppy Time

    • 1

      Decide on the size. Your female dog will need enough room to stretch out and nurse but you don't want it to be drafty.
      Some good base measurements are:
      • Small dogs: 21 to 34 inches by 21 to 34 inches by 15 inches
      • Medium dogs: 28 to 34 inches by 28 to 34 inches by 19 to 20 inches
      • Large dogs: 42 to 45 inches by 34 to 40 inches by 22 to 23 inches
      • Extra large dogs: 48 to 58 inches by 40 to 48 inches by 24 inches

    • 2

      Construct your box out of washable material. Vinyl or painted plywood is a good option. There is even plastic-coated plywood available. Make the front panel lower so that the mother can get out but not low enough for the puppies to escape.

    • 3

      Install a railing or a narrow shelf to keep the mother from squashing the puppies against the sides. Create a 4-inch wide shelf out of plywood that is 5 inches off the bottom. If installing a railing, follow the same measurements. Four inches away from the wall and 5 inches from the bottom.

    • 4

      Bed the box. Newspaper is an inexpensive bedding choice and is also a good insulator. Old sheets and towels work well, also.