Things You'll Need
- Phillips-head screwdriver
- Small paint brush
Instructions
Turn the clippers off and unplug the power cord from the electrical receptacle.
Lay the clippers with the bottom facing up on a table or flat surface. The bottom of the blade plate will be facing up.
Insert the Phillips-head screwdriver into the screw on the left side of the metallic plate on the blade. Turn the screw counterclockwise to loosen it and pull it straight out. Repeat this process to remove the screw on the right side of the blade.
Pull the blade straight off the clippers.
Brush any small pieces of hair off the clippers with the small paint brush.
Place a new blade on the clippers while aligning the screw holes. Insert the two screws on each side and tighten them clockwise with the Phillips-head screwdriver.