Things You'll Need
- Plastic garbage can
- 3/4 inch drill bit
- Cordless drill
- Reciprocal saw or keyhole saw
- Shovel
- Crushed stone
- Septic starter
Instructions
Drill 3/4 inch holes approximately every 4 inches all over the plastic garbage can, leaving 6 inches around the bottom and top of the can. Use a cordless drill with 3/4 inch drill bit to create the holes.
Cut the bottom out of the plastic garbage can, using a reciprocal saw or keyhole saw.
Determine where you would like the dog composter located. It should be away from your water source.
Dig a hole in the ground, big enough and deep enough for the plastic garbage can to be covered up to the holes. Allow the top of the plastic garbage can to sit above ground, at least 6 inches.
Place the garbage can into the hole. Fill in around the garbage can with dirt and put 8 inches of crushed stone in the bottom of the garbage can, for drainage.
Throw in your dog's waste into the garbage can and sprinkle a can of septic starter over top of it. Pour water into the garbage can, just enough to cover the dog waste.
Place the cover to the garbage can on top. Only open to throw dog waste, grass clippings and septic stater in to keep the break down process working.