Things You'll Need
- Vacuum cleaner
- Boric acid
- Push broom or whisk broom
Instructions
Remove pets to a safe location away from the areas you are going to treat before thoroughly vacuuming all carpets to remove dirt. This will also remove some of the fleas and eggs as well as make it easier to work the boric acid into the carpet. Also remove pet toys, bedding, and anything pets have come into contact with.
Sprinkle the boric acid on the carpet, being careful not to apply it too heavily. If an overabundance of the powder is applied, fleas may avoid it. In order for the boric acid to work the fleas must come into contact with it.
Work the boric acid into the carpet thoroughly using a vigorous back and forth motion as you sweep. The powder must penetrate the rug in order to come into contact with any fleas that may be underneath. Treat furniture with the same method.
Avoid the treated areas for 24 to 36 hours, allowing the boric acid to work. Vacuum the carpet thoroughly afterward, being careful to remove all of the powder.
Launder the pet bedding and clean the toys and any other items that will be returned to the pet areas. Do not allow any boric acid to come into direct contact with your pets at any time.