Pet Gear Happy Trails Assembly Instructions

The Pet Gear Happy Trails is a safe and fashionable pet stroller for small animals up to 30 lbs. This pet stroller safely contains and transports your pet by using front-swivel wheels with shock absorbers, rear brakes and an internal tether that attaches to your pet's harness for additional support. The Pet Gear Happy Trails is simple-to-use and features a bug-proof canopy, waterproof liners, large storage basket, one-hand folding and a soft, removable fleece pad.

Instructions

    • 1

      Unhook and release the folding lock on the side of the stroller. Grab the handle with one hand and the seat with the other, pull the two apart until the frame clicks into place on both sides. Test the frame to ensure that both sides are locked in.

    • 2

      Slide the rear wheel onto the axle, then slide a washer onto the axle. Place the straight part of the cotter pin through the designated hole on the axle. Align each of the tabs of the hub cap with the corresponding slots on the wheel. Snap the hub cap securely into place. Place the cover over the collet and press down until it snaps into place. Push the wheel cap onto the wheel hub. Repeat these steps for other side.

    • 3

      Turn the stroller over. Hold the assembled rear axle over the stroller frame. Align the legs of the stroller with the connecting leg unit of the axle. Push the axle onto the frame until it click into place on both sides. Firmly pull on the brackets to ensure that they are attached to the rear legs and properly locked in.

    • 4

      Place the connecting leg unit of the front wheel onto the front leg, making sure the locking lever is pointing down. Press the locking lever and slide the swivel part onto the front leg. Release the locking lever. The wheel should now be secured to the leg.

    • 5

      Close the canopy and unzip the stroller. Grab the stroller handle; press and hold the main frame lock release button on the bottom of the handle and simultaneously slide the second frame lock release to the right. Rotate the handle forward approximately 180 degrees until the stroller unlocks. Lower the stroller to the rear wheels to close. Hook the folding lock on the side of the stroller to securely lock the stroller.