Things You'll Need
- 1-inch PVC pipe, 3 to 4 ft. long
- Drill
- 1/8-inch-thick nylon cord, 8 to 10 ft. long
- Piece of leather, rawhide or burlap (4 inches by 8 inches), or an old leather glove
Instructions
Drill a hole in one end of the PVC pipe about ½ inch from the end. Make the hole through one side of the pipe only, not all the way through the second side.
Flip over the PVC pipe and drill a hole at the opposite end, through the opposite side from the initial hole.
Poke one end of the nylon cord up through one of the holes and inside the pipe, and tie a knot at the other end of the cord. Make the knot big enough so that it can't pass through the hole into the pipe.
Thread the cord through the pipe all the way down to the other hole. Poke the cord through that hole, pulling the end of the cord back outside the tube. Tug on the end of the cord to tighten it.
Tie a toy securely to the loose end of the cord. Use a piece of leather, rawhide or burlap, or even an old leather glove.