Instructions
Remove the two screws on the bottom of the Pet-Agree. Lift off the top of the case and insert a 9V alkaline battery, ensuring proper terminal alignment. Replace the top of the case and screws.
Depress the button on the top of the Pet-Agree and confirm that the red LED activates. If the light does not activate, replace or reposition the battery and retest.
Point the Pet-Agree toward the pet at a distance of five to 20 feet.
Press the activation button for a duration of one to two seconds while giving a verbal command. Repeat as necessary until the pet responds to the command accordingly.
How to Use a Pet-Agree Ultrasonic Pet Trainer
The Pet-Agree Ultrasonic Pet Trainer manufactured by K-II Enterprises can be used to teach a new command or break a bad habit for dogs and cats. This type of trainer is an alternative to shock collars, choker chains, electric mats or physical force in order to emphasize pet commands. The technology utilizes a high frequency sound to emphasize commands and is clearly audible to dogs and cats, but cannot be heard by humans. The unit has an effective range of five to 20 feet and operation is indicated by a diagnostic LED.