How to Mount a Super Bark Stop

The Bark Stop Super Ultrasonic Dog Trainer is an electronic device manufactured by Viatek Consumer Products Group. The device is mounted outdoors and emits a high-pitched, ultrasonic tone in response to dog barks. Although undetectable to humans, the sound is unpleasant to dogs which teaches them not to bark. When properly mounted, the device protects the desired area of the yard up to a maximum range of 50 feet.

Things You'll Need

  • Tape measure
  • 1-inch stainless steel screw
  • Screwdriver
Show More

Instructions

    • 1

      Find an outdoor location where you can mount the device so that it is pointed directly at the dog house, pen or the part of the yard where they dog stays most often. A post, fence or tree works well. In addition, there should be no obstructions in between the device and the dog.

    • 2

      Place a tape measure at the bottom of the desired mounting location and measure up to a height of 6 feet. This is the highest level that you should mount the Super Bark Stop device.

    • 3

      Place a 1-inch stainless steel screw against the wooden surface of the mounting location. Insert the screw with a screwdriver until only 1/4 inch of the head is still visible.

    • 4

      Turn the Super Bark Stop device around so the back faces the screw. Position the center screw hole at the top back of the device over the screw to secure it.