Things You'll Need
- Comb
- Glue
- Adhesive remover
- Rubbing alcohol
Instructions
Ears
Clean the inside of the ears with rubbing alcohol then place a small amount of glue on your index finger.
Comb back the hair in front of your puppy’s ear, following the direction it naturally grows.
Tip the top quarter of the ear down in front of the combed up hair, place your index finger behind the hair and roll outward.
Remove your finger while ensuring that the glue remains in place behind. The glue should only be touching the hair that you combed and the hair at the tip of the ear.
Remove any caught hairs from the glue and ensure that no glue is touching the collie’s skin. This precaution will keep the ear from being irritated and prevent the dog from scratching.
Repeat with the second ear, ensuring that both ears are tipped equally. If they are not, gently remove the glue and try again if the glue hasn’t set. If the glue has set, use the adhesive remover before undoing the tipped ear.
Head
Cup both glued ears and push inward until they meet in the middle.
Glue together several hairs at the top of the head where the ears meet. Use the same process as before, place a small amount of glue on your index finger and perform a rolling motion. The amount of hair should be about half an inch in diameter.
Remove your hands and ensure that the dog’s ears remain in place at the top of the head. Add a bit more glue to the bridge and to the tipped ears if necessary.
Maintenance
Massage the tipped ears several times a day over the fold.
Monitor the progress of the gluing every day. Adjust as necessary. As the puppy’s head grows the skin will stretch, which may result in unequal tipping or crooked ears.
Remove the glue with an adhesive remover every two or three weeks to gauge the process of the tipping and to rest the ears. Reapply after 24 hours.