Things You'll Need
- Traffic cone
- Tennis ball
- Duct tape
- Spray foam aerosol can
- Screws
- Screwdriver
- Scissors
- Thick plywood
- Table saw
- Glue
Instructions
Place a piece of duct tape over the small hole on the end of the traffic cone. Tip the cone upside down, and fill it with the aerosol spray foam. Allow the foam to set.
Use the saw to cut the plywood roughly six-inches bigger than the base of the cone. Screw the cone to the piece of plywood firmly.
Cut a hole in the tennis ball big enough for it to fit over the small hole on the end of the traffic cone, and glue it in place.
Allow the glue to dry, then use the homemade hoof stand to properly care for your horse.