Horse Stall Wall Divider Ideas

Horses must have adequate and safe shelter, which need not be fancy. When you build your own stables, a variety of recycled or low-cost materials is a good choice. It is more important to know the safe options.The wrong materials can be dangerous for your horse and costly for you.

  1. Panels

    • Horse panels are some of the most common dividers used in homemade stalls. These come pre-made, are usually heavy duty, and can be easily attached to the front and back of the stall. They usually come in 10 foot and 12 foot lengths, which are perfect for stalls.

      Problems arise if a horse kicks out and gets its leg stuck through the panel. You can prevent this by attaching either mesh wire or plywood to the panel to cover the openings. You will need to attach these with wire or other heavy-duty material that will resist chewing and wear and tear.

    Wood

    • Wood is the other common choice for horse stall dividers. It may be lumber, in the form of planks, or heavy-duty treated plywood. Wooden dividers keep the horses apart while providing good protection from kicks.

      Cover the tops of the wood to keep the horse from chewing. This ensures the wood is treated to resist fire and rot. Make accurate measurements before you cut your wood.

    Wire Mesh

    • Heavy-duty welded wire mesh is an option for barn owners who want lots of ventilation. Do not use standard mesh fence or chain link as a stall divider. Horses can kick right through it and damage the stall and themselves.

      Install a metal framework and weld heavy-duty mesh grill to it. It must be sturdy enough to withstand a direct kick from the horse but it can be a good option if you can afford it. You will need a professional welder, so be aware of the expense before you plan for this option.

    Dimensions

    • A good size for horse stalls is 12 feet by 12 feet. This allows plenty of room for the horse to turn around, get up, and lie down. Another standard measurement is 10 feet by 10 feet but smaller stalls are not recommended for horses. When building foaling stalls, or stallion stalls, add another 12 feet and make the stall 24 feet by 12 feet.