Things You'll Need
- Siphoning hose
- Bucket
- Lint-free towel
- Mild soap
- Bleach
- Hose
Instructions
Locate the drain plug inside of the trough.
Pull the plug out from the drain and allow the water to flow out from the tub.
Speed up the process by siphoning the water out from the trough or by using a bucket to scoop water out.
Lift the trough up when the water gets low enough and tilt it in the direction of the drain. Some troughs are built-in and unable to lift up. For troughs that you cannot lift, scoop the water by hand toward the drain.
Wash the interior of the trough with soap and water. If the trough is moldy, mix a cup of bleach with water, then scrub the trough. Wash the trough with soap and water and rinse thoroughly.
Spray the trough down with a hose and allow the water to drain out again.
Replace the plug and refill the trough.