How to Use a Three Horse Slant Load Aluminum Trailer

Hauling horses from one place to another requires preparation, skill, special equipment (such as shipping boots) and, most importantly, a trailer. There are a number of trailer types to choose from, including straight load and slant loads. A three-horse slant load is a good option for many equine enthusiasts, and an aluminum version is lighter and will hold its value better than a steel trailer.

Things You'll Need

  • Three-horse slant load trailer
  • Halter
  • Lead rope
  • Horse
  • Shipping boots (optional)
Show More

Instructions

    • 1

      Hitch the trailer to your hauling vehicle. This step depends upon whether your trailer has a gooseneck or a bumper pull hitch. A gooseneck attaches to a hitch in the bed of a truck and is best for heavy-duty hauling. A bumper pull attaches to a ball hitch at the back of the hauling vehicle's bumper. Follow the manufacturer's directions to attach your specific hitch.

    • 2

      Open the rear trailer door. Slant load trailers typically have wider entryways for the horses, which makes the trailer a bit more inviting than a straight load trailer.

    • 3

      Load the horses. Lead the horse with a halter and lead rope toward the trailer and encourage him to enter, either by stepping up or walking up the ramp (if your trailer is equipped with this feature). Lead the first horse to the first slot at the front of the trailer and subsequent horses in the second and third slots.

    • 4

      Secure the horses. Tie the lead rope to the trailer and secure the stall compartment before loading the next horse. A slant load trailer will have safety locks that allow the separation of each stall, keeping the horses a safe distance apart.

    • 5

      Close and lock the back door. Once the horses are loaded and secured, exit the trailer and close the back door, making sure it is locked.