How to Install an Equine Fence

Horses are master escape artists and keeping them in a pasture can be a challenge. An electric fence is a good way to keep them contained and is less maintenance than a wood fence. Horses are intelligent animals and learn quickly that the fence is to be left alone. It also keeps predators out.

Things You'll Need

  • Electric tape fencing Wood posts Line posts Sledgehammer or post driver Post hole digger Concrete Insulators Charger Voltage meter
Show More

Instructions

    • 1

      Measure your pasture. Decide how many gates you are going to need and the size of them. The height that you want your fence will also help you determine what you need.

    • 2

      Purchase horse safe electric tape fencing. This type of fencing is wider and much more visible to horses. You will also need to purchase insulators, posts, and a charger.

    • 3

      Set your wood posts at each corner of the fence and on either side of each gate opening. Bury each post at least 2 feet and fill the hole with concrete.

    • 4

      Run a string line around the perimeter. This will help you set your line posts straight. Tap each post in about a foot or so. They don't have to be set as deep as your corner posts. Attach your insulators to your posts.

    • 5

      Start at the corner closest to where the power source will be and begin stringing your fence. Your fence should have at least 3 strands of wire and be 4 to 5 feet high for adult horses. Foals will require more strands.

    • 6

      Connect your charger to the fence. Follow all of the instructions very carefully. Set in the correct number of ground rods for the amount of fence you are using.

    • 7

      Test your fence to make sure it is working properly and nothing is interfering with the power. Check random places in the fence line with a voltage meter to test the current.