How to Clean a Horse Bit

Whether you ride English or Western style, keeping your horse's bit clean is an important part of caring for your tack. The rules for bit care and cleaning are the same for both disciplines and there are several good ways to clean a bit. If you rinse your bit off after every ride, as you should, it will not take you very long to get your bit show worthy.

Things You'll Need

  • Saucepan
  • Toothbrush
  • Metal Polish that is formulated for bits
Show More

Instructions

    • 1

      Remove the bit completely from your bridle and detach the reins.

    • 2

      Boil water in a small saucepan and gently drop the bit into the boiling water. Place it on low and let the bit sit in the hot water for 10 minutes. This will loosen any grime that has accumulated on the bit and the dirt will rise to the top of the water, leaving the bit clean. If you rinse you bit daily this step is not necessary.

    • 3

      Remove the bit from water and let it cool enough for you to handle it without getting burned. Then using a toothbrush scrub around the edges and any hinges, paying special attention to any crevices where grime may still be trapped.

    • 4

      Polish the bit using a polish that is specifically made for use on mouthpieces. Regular polishes are not safe for your horse to ingest. Apply the polish as noted on the label. Some bits are not designed to be polished and it will be impossible for you to get them to shine no matter how much buffing you do. Only stainless steel bits should be polished.

    • 5

      Re-attach the bit to your bridle's cheekpieces and re-attach the reins.