How to Make Mini Horse Jumps

Miniature horses are popular residents in the barn, despite their small size. They developed with the crossing of different types of small horse and pony breeds. Breeders have kept miniature horses as pets and working companions for centuries. The horses are too small to be ridden, and often appear in pulling and jumping competitions. Making your own miniature horse jumps is a simple and cost-effective way to prepare them for the show ring.

Things You'll Need

  • 2 PVC t-joints, 1 inch diameter
  • Power drill
  • Hole saw drill bit, 1 inch diameter
  • PVC glue
  • 3 PVC pipe sections, 1 inch diameter by 48 inches
  • 4 PVC pipe sections, 1 inch diameter by 6 inches
  • 3 PVC end caps
  • Screws
  • Hack saw
  • Colored duct tape
  • 3 PVC pipe sections,1 inch diameter by 47 inches
Show More

Instructions

    • 1

      Lay one of the t-joints on a flat surface and cut a hole directly in the center of the joint. Fit the drill with a hole saw drill bit and set the bit against the t-joint, pressing gently on the trigger to allow the bit to dig into the joint. Apply steady pressure when the bit catches, releasing the trigger once the bit has cut through the pipe. Repeat with the remaining t-joint.

    • 2

      Apply a layer of glue to both ends of one 48-inch section of pipe and slide the newly-drilled holes of the t-joints over the ends. The long section of pipe serves to help stabilize the jump and keep it from shifting if the horse bumps it while jumping.

    • 3

      Place one 6-inch section of pipe in each of the remaining holes of the t-joints to finish the jump base. Glue the pipe ends before insertion and leave to dry overnight to allow the glue to harden.

    • 4

      Cut the end caps in half to form six half moon-shaped jump cups. Space three of the jump cups along one of the remaining 48-inch PVC sections, screwing them into place. Attach the remaining three cups to the last PVC pipe and slide the uprights into the top hole of the t-joints with the cups facing inward.

    • 5

      Wrap three or four strips of colored duct tape around each of the 47-inch PVC pipe sections and place them in the jump cups to complete your mini horse jump. Miniature horses have relatively poor eyesight and the duct tape makes the jump bars easier to see.