Amiracle Slimline Wet Dry Instructions

Amiracle Slimline wet/dry is a filter for an aquarium. The slimline is one of the most popular and versatile filter. It can fit almost any size aquarium tank. They come in as little as eight inches wide so that it can just about anywhere. Installing the Amiracle Slimline wet/dry filter can be done in a few short steps so that you can have your aquarium up and running in a short amount of time.

Instructions

    • 1

      Connect the flex hose to the bottom of the pre-filter box.

    • 2

      Hang the box onto the backside of the aquarium along with the skimmer box. This will be placed on the inside of the aquarium.

    • 3

      Tighten the wing nut.

    • 4

      Put the siphon tube inside the pre-filter box. It will go to the side of the filter and not inside the sponge.

    • 5

      Put the filter tank underneath the stand.

    • 6

      Connect the flex hose to the lid fitting.

    • 7

      Put the return spout next to the pre-filter box so that it points toward the opposite end of the aquarium or put the spout on the opposite end of the aquarium away from the pre-filter box.

    • 8

      Place the return hose so the hole is above the water line.