Instructions for a BiOrb LED 12V Intelligent Light

The biOrb Intelligent Light developed by Reef One is an LED light designed for use with the biOrb range of aquariums. By imitating the natural 24-hour lighting cycle, the biOrb Intelligent Light helps to reduce the stress on aquarium fish and is pre-programmed to automatically progress through sunrise, daylight, sunset and moonlight phases at set intervals throughout the day. Installing the biOrb Intelligent Light in your biOrb aquarium is a simple process and, once fitted, requires very little maintenance.

Things You'll Need

  • Official Reef One biOrb 12-volt AC power supply
Show More

Instructions

    • 1

      Plug the power supply into the wall outlet.

    • 2

      Connect the din socket attached to the Intelligent Light into the Reef One power supply. The Intelligent Light will automatically turn on and begin the moonlight phase for an hour, before gradually switching to the standard 8-hour daylight phase. You can reset the start time of the cycle at any time by simply pressing the bubble button in the middle of the Intelligent Light.

    • 3

      Place the Intelligent Light in the corresponding hole in the top of your biOrb aquarium. The Intelligent Light should be left turned on at all times.

    • 4

      Check the lens and light regularly, and clean as required.