Things You'll Need
- Pump head
- Filter canister
- Pressure side hose connection
- Suction side hose connection
- Filter media container
- Suction pipe
- Strainer
- Suction cups with clips
- Outlet pipe
Instructions
Remove the filter media container with the handle. Turn the lid counter-clockwise and open it.
Place the lid on the filter media container. Turn it clockwise so it closes. Put it in the filter canister. Put on the pump head. Make sure the o-ring is correctly fitted. Close the clips.
Put the filter under the aquarium. Make sure it is below water level. Fit the outlet pipe.
Connect the suction pipe and strainer. Attach it to the side of aquarium using the two suction cups. Fit the hose connections to the filter. Make sure the suction side is on the bottom intake nozzle and the pressure side is on the pump head. Fasten hoses using the clamping nut.
Operate the filter. There are three ways to prime the filter. Prime the filter using the starter bulb, the Universal Installation Kit 1 or sucking the hose on the pressure side. Connect the side hose and spray bar as the filter fills with water. The pump switches on as the filter is filled with water. Place the plug into the end of the spray bar once the air bubbles disappear.