Things You'll Need
- Pitcher
- Sink
- Large tub (optional)
Instructions
Shut off the water flow to the valve block on your Marineland C-360 canister filter. Lift the valve block and the attached hoses from the motor head. Pick up the canister and carry it to a clean sink or large tub.
Flip up the lock buckles and lift buckles to unlatch the motor head from the canister top. Lift it from the canister.
Turn the motor head over and remove the impeller assembly cover and impeller assembly from underneath. Rinse both pieces under warm tap water to remove debris. Reinsert the pieces into the motor head and set the motor head aside.
Remove the media securing plate. Lift the Stack n' Flo filter trays and filter media from the canister. Separate the filter media--filter floss pad, ceramic rings, BIO-Filter balls, carbon filter bags and filter foam--and trays inside your sink or tub.
Fill a pitcher with water from the aquarium and pour it over the media and trays. Repeat the process until you've removed the bulk of any build-up such as sediment that can block the filter media from filtering efficiently. Rinse the canister interior with the same water.
Reassemble the media and trays and return the trays and media securing plate to the canister.
Return the motor head--intake nozzle aligned with the connecting pipe--to the canister. Close the lock and lift buckles.
Carry the canister back to your aquarium. Lower the valve block into motor head, turn and flip down the key to lock the valve block in place and flip down the key cover. Push the ̶0;Start̶1; button on top of the motor head to begin using the filter again.