How to Set Up a Kotobuki Filter for a Fish Tank

All fish tank filters serve to make the water suitable for fish by eliminating debris and harmful chemicals from the water. Kotobuki filters are unique in that they provide an automatic continuous filter able to filter even the most microscopic particles from the water. Kotobuki's filter technology is so respected that it is used across a number of different industries, from nuclear power to the food processing industry. Kotobuki manufactures a few different styles of fish tank filters: hang-on filters that rest on the side, upper filters that rest on the top of the tank, bottom filters that lie below the gravel and internal filters that require no installation since they are built into the tank.

Instructions

    • 1

      Remove filter from box and review the directions to understand how the system will operate once installed.

    • 2

      Hold the filter cartridge by the handle and insert it into the slot as depicted on the left side of image.

    • 3

      Hang filter over tank's edge, making sure it is in the correct vertical position.

    • 4

      Fill the tank to the desired level with water.

    • 5

      Attach the tube that will draw in the water to the filter and leave the other end pointing down into the water.

    • 6

      Plug the filter's electrical cord into an electrical outlet.

    • 7

      Turn the valve located on top of the filter to the "on" position.