Things You'll Need
- Newspaper
- Pond hose
- Dechlorinator
- Rubber or latex gloves
Instructions
Spread newspaper all around the perimeter of your pond. This will absorb the oil.
Place the pond hose tip at least 6 inches under your pond water level. This will lessen the water surface disturbance that will occur when you turn the water on.
Add dechlorinator if you have fish. Measure enough to treat the water that you will be adding to your pond.
Turn the water on at a low rate of flow. You want your water level to rise slowly so it doesn't disturb the oil.
Turn off the water when you see that all the oil has flooded over the pond. The newspaper you placed in the first step should now contain all the oil.
Drain your pond to your desired water level. You can drain it through a bottom drain or discharge using your submersible pump. Discard the newspaper.