Things You'll Need
- Time-release blocks
- Mechanical fish feeder
Instructions
Block Feeding
Appropriately measure and cut the blocks, if necessary. Most blocks feed for seven days, so if you're planning on being away for less time, then cut the block in half to avoid unnecessary or overfeeding.
Rinse the block to remove any loose dust or particles.
Place the block in the center of the tank, where it should sink to the bottom.
Mechanical Feeding
Install the mechanical feeder on the rim of your tank so that the small opening at the bottom of the chamber hangs directly over the water.
Fill the chamber with your desired food.
Adjust the timer and start the feeder.