Things You'll Need
- Measuring tape
- Pencil
- Six 6-foot 2x2 pine frame boards
- One 8-foot 2x2 pine frame board
- Drill
- 2-inch screws
- Roll of 1x1 square mesh wire welded fencing
- Wire cutters
- Staple gun
- Staples
- 1-inch screws
- 2 cabinet hinges
- 2 hook and eye latches
Instructions
Building the Frame
Measure, mark and saw the 6-foot 2x2 planks into 4-foot and 2-foot sections.
Measure, mark and cut the 8-foot 2x2 plank into four 2-foot sections.
Take four of the 2-foot sections and use the drill and 2-inch screws to screw them into a flat square. Repeat with four more 2-foot sections.
Use the drill and 2-inch screws to attach the 4-foot planks around the outside of the flat squares in a rectangular shape.
Use the remaining 4-foot planks and 2-foot planks, and the drill and 2-inch screws, to make a flat rectangle that will act as the door frame.
Enclosing the Hutch
Use the wire cutters to cut four 4x2 sections of the wire mesh.
Use the staple gun and staples to attach three of the wire mesh sections you just cut to three sides of the rectangular hutch frame.
Use the staple gun and staples to attach the remaining section of wire to the stand-alone rectangular door frame.
Use the drill and 1-inch screws to attach the cabinet hinges to the corners of the door frame and to the open side of the hutch frame.
Attach the hooks to the door frame, and attach the eyes in line with the hooks in the hutch frame.