Things You'll Need
- Rubber gloves
- Goggles
- Spare tank or carrier
- Trash bag
- Bowl
- Dish washing liquid
- Large tray
- Buckets
- Household bleach or reptile tank cleaner
- Sponges
- Paper towels
Instructions
Put on rubber gloves and goggles.
Remove your reptile and place it in another tank in another room.
Unplug lighting and heating equipment.
Remove all accessories, such as rocks and branches.
Empty the substrate (if it's disposable) into a trash bag. Wash sand or gravel in a bowl with hot water and a few squirts of dish washing liquid. Rinse thoroughly and spread it out on a tray to dry. To make the sand or gravel dry faster, heat it in the oven at 200 degrees for about 30 minutes. Heating it will also disinfect it.
Use paper towels to wipe away any traces of urine or feces remaining in the tank and discard the dirty paper towels.
Make a solution in a bucket of one part household bleach to 16 parts of hot water. Alternatively, use a spray cleaner designed for reptile tanks.
Scrub the sides, bottom and top of the tank. Use a barely damp sponge on the top of the tank.
Wipe the main part of the tank several times with sponges soaked in fresh water to remove all traces of the cleaning solution.
Wipe down the tank with dry paper towels then let it air out until it's completely dry. Any remaining traces of the cleaning solution could harm your pet if inhaled.
Wash all accessories, including food and drink bowls, with the cleaning solution and rinse them thoroughly.
Replace the substrate and accessories once they are dry and cool and turn on the heating and lighting equipment.
Reintroduce your reptile to the tank.