How to Make a Hay Rack for a Rabbit

Hay is an essential part of an adult rabbit's diet for dental and digestive health. However, most store-bought hay racks are flimsy and far too small. Simply scattering hay in the rabbit's cage can be messy and unsanitary. One of the best options for feeding rabbits plenty of clean hay is to custom build a wire hay rack.

Things You'll Need

  • Work gloves
  • Wire cutters
  • Thick rolled wire mesh or metal hardware cloth with spaces between 3/4 inch and 2 inches
  • 3 metal key fobs or leash clips
  • Small dish or piece of plastic
Show More

Instructions

  1. Making a Hay Rack

    • 1
      Choose a location convenient for rabbit and owner.

      Find a convenient location on the rabbit cage for the hay rack. The hay rack should not hang on the door or on a side of the cage where a shelf, water bottle or food bowl is attached.

    • 2
      Wire clippers.

      Wear work gloves and use wire clippers to cut a piece of wire mesh slightly smaller than the side of the rabbit cage. The piece should be at least 6 inches wide by 8 inches long.

    • 3

      Bend two opposite sides of the wire up into a rectangular or U-shape. Make one side slightly higher than the other. Leave a large opening at the top and an opening at each side.

    • 4
      Feel the wire edges with gloves off.

      Bend sharp edges of the wire in or clip them off. Feel the edges to make certain they are not sharp, to ensure the rabbit will not be injured while using the wire rack.

    • 5
      A fob to connect the hay rack to the cage.

      Connect a fob or leash clip to each side of the hay rack and to the middle of the bottom of the rack. Hang the hay rack on one of the sides of the rabbit cage, on the inside of the cage. Carefully clip all three fobs onto the bars of the cage and fill the rack with hay.

    • 6

      Put the dish or sturdy piece of plastic under the hay rack to catch hay dust that can fall through the rack.